M.Tech. Programme

Electronics and Communication – Applied Electronics and Instrumentation

Curriculum and scheme of Examinations

SEMESTER I

Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Marks
Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Continuous Assessment	University Exam	Total
TAM 1001	Mathematical Methods for Electronics	3	3	3	50	100	150
TMC 1001	Advanced Digital Signal Processing	3	3	3	50	100	150
TAC 1001	Advanced Optical Instrumentation	3	3	3	50	100	150
TAC 1002	Non Linear Control Systems	3	3	3	50	100	150
TAC 1003	Adaptive Control Systems	3	3	3	50	100	150
TAC 1004	Advanced Digital System Design	3	3	3	50	100	150
TAC 1101	Instrumentation & Control System Lab	1	2	-	50	-	50
TAC 1102	Project Part I	1	-	-	50	-	50
TAC 1103	Seminar	2	2	-	50	-	50
	TOTAL	22			450	600	1050

SEMESTER II

Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Marks
Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Continuous Assessment	End Semester Exam	Total
TAC 2001	Digital Image Processing	3	3	3	50	100	150
TAC 2002	Mixed Signal Circuit Design	3	3	3	50	100	150
**	Stream Elective I	3	3	3	50	100	150
**	Stream Elective II	3	3	3	50	100	150
**	Department Elective	3	3	3	50	100	150
*	Non- Dept.(Interdisciplinary) Elective	3	3	3	50	100	150
TAC 2101	VLSI & Embedded Systems Lab	1	2	-	50	--	50
TAC 2102	Project Part II	2	-	-	100	-	100
TAC 2103	Seminar	2	2	-	50	-	50
	TOTAL	23		---	500	600	1100

* Students can select a subject from the subjects listed under non department (Interdisciplinary) electives for the second semester as advised by the course coordinator.

** Students can select a subject from the subjects listed under stream/department electives for the second semester as advised by the course coordinator.

STREAM ELECTIVES OFFERED IN APPLIED ELECTRONICS AND INSTRUMENTATION FOR SEMESTER II

TAE 2001 Micro Electro Mechanical Systems

TAE 2002 Nano Electronics

TAE 2003 Neuro Fuzzy Systems

TAE 2004 Computer Vision

SEMESTER III

Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Marks
Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Continuous Assessment	End Semester Exam	Total
**	Stream Elective III	3	3	3	50	100	150
**	Stream Elective IV	3	3	3	50	100	150
TCC 3101	Research Methodology	1	-	-	50	-	50
TCC 3102	Industrial Training	1	3	-	50	-	50
TAC 3101	Thesis - Preliminary	4	14	-	200	-	200
	TOTAL	12			400	200	600

** Students can select a subject from the subjects listed under stream electives for the third semester as advised by the course coordinator.

STREAM ELECTIVES OFFERED IN APPLIED ELECTRONICS AND INSTRUMENTATION FOR

SEMESTER III

TAE 3001 Computer aided design of Control Systems

TAE 3002 PWM Schemes for Power Converters

TAE 3003 RF MEMS Circuit Design

TAE 3004 Current Topics in Instrumentation

SEMESTER IV

Code No	Subject Name	Credits	Hrs/week	Marks
				Continuous Assessment		University Exam		Total
				Guide	Evaluation Committee	Thesis Eva.	Viva Voce	Total
TMC 4101	Thesis	12	29	200	200	100	100	600
	Total	12	29	200	200	100	100	600

Note : 6 to 10 hours per week is for department assistance

M.Tech. Programme

Electronics and Communication – Microwave and TV Engineering

Curriculum and scheme of Examinations

SEMESTER I

Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Marks
Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Continuous Assessment	University Exam	Total
TMM 1001	Mathematical Methods for Communication	3	3	3	50	100	150
TMC 1001	Advanced Digital Signal Processing	3	3	3	50	100	150
TMC 1002	Advanced Digital Communication	3	3	3	50	100	150
TMC 1003	Optical Communication Systems	3	3	3	50	100	150
TMC 1004	RF Circuits Design	3	3	3	50	100	150
TMC 1005	Antennas & Design	3	3	3	50	100	150
TMC 1101	Communication Systems & Optics Lab	1	2	-	50	-	50
TMC 1102	Project Part I	1	-	-	50	-	50
TMC 1103	Seminar	2	2	-	50	-	50
	TOTAL	22			450	600	1050

SEMESTER II

Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Marks
Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Continuous Assessment	End Semester Exam	Total
TMC2001	Wireless Microwave Communication	3	3	3	50	100	150
TMC2002	Microwave Integrated Circuits	3	3	3	50	100	150
**	Stream Elective I	3	3	3	50	100	150
**	Stream Elective II	3	3	3	50	100	150
**	Department Elective	3	3	3	50	100	150
*	Non Dept.(Interdisciplinary) Elective	3	3	3	50	100	150
TMC2101	RF Design & Measurements Lab	1	2	-	50	-	50
TMC2102	Project Part II	2	-	-	100	-	100
TMC2103	Seminar	2	3	-	50	-	50
	TOTAL	23		---	500	600	1100

* Students can select a subject from the subjects listed under non department (Interdisciplinary) electives for the second semester as advised by the course coordinator.

** Students can select a subject from the subjects listed under stream/department electives for the second semester as advised by the course coordinator.

STREAM ELECTIVES OFFERED IN MICROWAVE AND TV ENGINEERING FOR SEMESTER II

TME 2001 Computational Methods for Electromagnetics

TME 2002 Secure Communication

TME 2003 Design of CDMA Systems

TME 2004 CMOS RF Circuit Design

SEMESTER III

Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Marks
Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Continuous Assessment	End Semester Exam	Total
**	Stream Elective III	3	3	3	50	100	150
**	Stream Elective IV	3	3	3	50	100	150
TCC 3101	Research Methodology	1	-	-	50	-	50
TCC 3102	Industrial Training	1	3	-	50	-	50
TMC3101	Thesis - Preliminary	4	14	-	200	-	200
	TOTAL	12			400	200	600

** Students can select a subject from the subjects listed under stream electives for the third semester as advised by the course coordinator.

STREAM ELECTIVES OFFERED IN MICROWAVE AND TV ENGINEERING FOR SEMESTER III

TME 3001 Electromagnetic Interference and Compatibility

TME 3002 Simulation of Communication Systems & Networks

TME 3003 Advanced Coding Theory

TME 3004 Current Topics in Communication

SEMESTER IV

Code No	Subject Name	Credits	Hrs/week	Marks
				Continuous Assessment		University Exam		Total
				Guide	Evaluation Committee	Thesis Eva.	Viva Voce	Total
TMC 4101	Thesis	12	29	200	200	100	100	600
	Total	12	29	200	200	100	100	600

Note : 6 to 10 hours per week is for department assistance

M.Tech. Programme

Electronics and Communication – Signal Processing

Curriculum and scheme of Examinations

SEMESTER I

Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Marks
Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Continuous Assessment	University Exam	Total
TSM 1001	Linear Algebra for Signal processing	3	3	3	50	100	150
TSC 1001	Random Processes & Applications	3	3	3	50	100	150
TMC 1002	Advanced Digital Communication	3	3	3	50	100	150
TSC 1002	DSP Processor & Architecture	3	3	3	50	100	150
TSC 1003	Digital Filter Design & Applications	3	3	3	50	100	150
TSC 1004	Speech Signal Processing	3	3	3	50	100	150
TSC 1101	DSP Systems Lab	1	2	-	50	-	50
TSC 1102	Project Part I	1	-	-	50	-	50
TSC 1103	Seminar	2	2	-	50	-	50
	TOTAL	22			450	600	1050

SEMESTER II

Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Marks
Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Continuous Assessment	End Semester Exam	Total
TAC 2001	Digital Image Processing	3	3	3	50	100	150
TSC 2001	Estimation and Detection Theory	3	3	3	50	100	150
**	Stream Elective I	3	3	3	50	100	150
**	Stream Elective II	3	3	3	50	100	150
**	Department Elective	3	3	3	50	100	150
*	Non Dept. (Interdisciplinary) Elective	3	3	3	50	100	150
TSC 2101	VLSI & Embedded Systems Lab	1	2	-	50	-	50
TSC 2102	Project Part II	2	-	-	100	-	100
TSC 2103	Seminar	2	2	-	50	-	50
	TOTAL	23		---	500	600	1100

* Students can select a subject from the subjects listed under non department (Interdisciplinary) electives for the second semester as advised by the course coordinator.

** Students can select a subject from the subjects listed under stream/department electives for the second semester as advised by the course coordinator.

STREAM ELECTIVES OFFERED IN SIGNAL PROCESSING FOR SEMESTER II

TSE 2001 Statistical Signal Processing

TSE 2002 Optical Signal processing

TSE 2003 Multirate Systems & Wavelets

TSE 2004 Biomedical Signal Processing & Systems

SEMESTER III

Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Marks
Code No.	Name of Subject	Credits	Hrs / week	Exam duration	Continuous Assessment	End Semester Exam	Total
**	Stream Elective III	3	3	3	50	100	150
**	Stream Elective IV	3	3	3	50	100	150
TCC 3101	Research Methodology	1	-	-	50	-	50
TCC 3102	Industrial Training	1	3	-	50	-	50
TSC 3101	Thesis- Preliminary	4	14	-	200	-	200
	TOTAL	12			400	200	600

** Students can select a subject from the subjects listed under stream electives for the third semester as advised by the course coordinator.

STREAM ELECTIVES OFFERED IN SIGNAL PROCESSING FOR SEMESTER III

TSE 3001 Spectral Analysis

TSE 3002 VLSI Structures for Digital Signal Processing

TSE 3003 Array Signal Processing

TSE 3004 Current Topics in Signal Processing

SEMESTER IV

Code No	Subject Name	Credits	Hrs/week	Marks
				Continuous Assessment		University Exam		Total
				Guide	Evaluation Committee	Thesis Eva.	Viva Voce	Total
TMC 4101	Thesis	12	29	200	200	100	100	600
	Total	12	29	200	200	100	100	600

Note : 6 to 10 hours per week is for department assistance

List of Department Electives for II Semester (Common for all Streams)

TCD 2001 Design of VLSI Systems

TCD 2002 Design of Embedded Systems

TCD 2003 Optimization Techniques

TCD 2004 Information Hiding & Data Encryption

NON-DEPARTMENT (INTERDISCIPLINARY) ELECTIVES OFFERED II SEMESTER COMMON TO ALL STREAMS IN ELECTRONICS & COMMUNICATION

1. CSI 2001 Finite Element Analysis

2. CSI 2002 Theory of Plates and Shells

3. CSI 2003 Advanced Mechanics of Materials

4. CSI 2004 Mechanics of Composites

5. CSI 2005 Random Vibration

6. CEI 2001 Philosophy of Technology

7. CEI 2002 Environmental Management

8. CEI 2003 Environment and Pollution

9. CGI 2001 Geotechnical Engineering for Infrastructure Projects

10. MII 2002 Financial Management

11. MII 2003 Organizational behavior

12. MII 2004 Operations Research

13. MII 2005 Management Information Systems

14. MDI 2001 Applied Finite Element Methods

15. MDI 2002 Acoustics and Noise Control for Engineers

16. MPI 2001 Computational Fluid Dynamics

17. MTI 2001 Numerical Methods

18. EGI 2001 Navigation, Guidance And Control

19. EPI 2001 Energy Conservation and Management

APPLIED ELECTRONICS AND INSTRUMENTATION

TAM 1001 MATHEMATICAL METHODS FOR ELECTRONICS 3-0-0-3

Algebraic structures. Sets-relations-Groups-subgroups-cosets and Lagranges Theorem

Rings Integral domain and Fields-Definition and examples.

Linear Algebra. Vector space-subspace-linear dependence-basis-dimension-Interpolation and wronskian-Linear Transformation-change of bases-diagonalization.

Eigen values and eigen vectors-diagonalization of matrices--exponential matrices-of linear recurrence relations.

Probability spaces: Random variables-distributions and densities-statistical independence-expectations-moments and characteristic functions.

Sequence of random variables and it’s convergence-Chebychev’s inequality-law of large numbers-Central limit theorem.

Random processes: Definition and classification of random processes-stationarity(strict sense and wide sense)-Autocorrelation function and its properties.-Ergodicity- ergodic theorems. spectral density function and it’s properties.

Special Random Processes.Poisson process-properties-Markov process- Markov Chains-Transition probability matrix-Chapman-Kolmogorov theorem.-Birth death process-weiner process.

References:

1. C.L.Liu,Elements of Discrete Mathematics, Tata McGraw Hill

2. Fraleigh, A first course in abstract algebra, Narosa

3. Jin Ho Kwak and Sungpyo Hong, Linear Algebra-, 2/e, Springer.

4. Strang and Gilbert, Introduction to Linear Algebra, 3/e, Cambridge.

5. J.Medhi, Stochastic processes, New Age International, India

6. Stark Henry,Probability and random process with application to signal processing,3/e,Pearson Education India.

7. Gray.R.M and Davisson.L.D, An introduction to statistical signal processing, Cambridge university press.

8. T. Veerarajan, Probability, Statistics and Random processes, Tata- McGraw Hill

For the End semester exam ( 50 marks), the question paper shall have six questions of 10 marks each covering entire syllabus out of which any five shall be answered. For the internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two)

TMC 1001 ADVANCED DIGITAL SIGNAL PROCESSING 3-0-0-3

Basics of Multirate systems and its application, up sampling and Down - Sampling, Fractional Sampling rate converter. Polyphase decomposition. Efficient realisation of Multirate systems.Uniform filter banks and it's implementation using polyphase decomposition. Two channel Quadrature Mirror Filter Banks, Perfect Reconstruction, M-channel PR QMFB.

Time Frequency Analysis, Heisenberg's uncertinity principle. Short time fourier transform - Gabor transform. Continous Wavelet Tranform and it's properties. Multi Resolution Analysis, Discrete Wavelet Transform, Orthonormal Wavelet Analysis - Filterbank interpertation. Haar and Daubechise wavelets, Bi-orthogonal wavelets and Filter bank interpretation. B -Spline wavelets, Wavelet packets.2D wavelt transforms. Application of wavelet tranform for data compression, noise reduction.

Linear Prediction -Forward and Backward Prediction - Levinson-Durbin Algorithm, Schur Algorithm.

Power spectrum estimation of signals: Wide Sense Stationary Random Processes. Power spectral density. Non parametric methods: periodogram,Backman-Tuckey method. Parametric method: ARMA, AR processes, Yule-Walker method.

Reference

1) P. P. Vaidyanathan, Multirate Systems and Filterbanks, Prentice Hall

2) Wavelet Transforms - Bopadikar and Rao, Pearson Education

3) Insight into wavelets, K. P. Soman, Prentice Hall India

4) Digital signal Processing, By John G. Proakis, Dimitris G. Manolakis

Pearson Education

Reading

1) L. Cohen, Time Frequency Analysis, Prentice Hall.

2) Wavelets and Filterbank, G Strang & T Nguyen , Wellesly-Cambridge

3) Wavelets and subband coding, M Vetterli & J Kovacevic, Prentice Hall

For the internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project.

TAC 1001 ADVANCED OPTICAL INSTRUMENTATION 3-0-0-3

Lasers for instrumentation:-Condition for laser oscillations-Coherence, He-Ne laser -frequency stabilization, semiconductor lasers, line width and frequency stability. Triangulation, types of laser telemeters - Pulsed and sine wave telemeters -accuracy and ambiguity problem. LIDAR and applications.

Laser for interferometry:- Basic optical interferometers -Performance parameters and limits of performance. Laser vibrometry- white light interferometry. Speckle- pattern instruments-Speckle properties-Speckle in single point interferometers-electronic speckle pattern inteferometry

Laser Doppler Velocimetry-Principle of operation and performance parameters. Doppler signal processing.

Gyroscopes-The Sagnac effect-Basic Gyro configurations –Fiber optic Gyroscopes (FOG)-Open loop FOG-components and technology to implement FOGs.

Reference:-

Silvano Donati, Electro-Optical Instrumentation-Sensing and Measuring with Lasers, Pearson Education, 2005 Edn.

Reading:

Vardeyen, Joseph, T-Laser Electronics, 2^nd Edn 1993, Prentice Hall of India Private Limited

For the End semester exam ( 50 marks), the question paper shall have six questions of 10 marks each covering entire syllabus out of which any five shall be answered. It shall have 50% problems & 50% Theory.

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project.

TAC 1002 NON-LINEAR CONTROL SYSTEM 3-0-0-3

Non-linear systems

-Characteristics, Common non linearities.

Method of Analysis:

-Linearization techniques

-Describing function analysis of non-linear systems. Dual input Describing

function.(DIDF)

-Phase plane analysis of non-linear systems, existence of limit cycles

- Lyapunov stability theory for continuous and discrete time systems.

Construction of Lyapunov function.

Non linear control system design:

-Variable structure controller and sliding control.

- Implementation of switching control laws.

- Cascade design.

-Partial state feedback design.

References:

1. Jean-Jacques E. Slotine&Weiping Li, Applied Nonlinear Control, Prentice-

Hall.,NJ,1991

2. Hassan K Khalil, Nonlinear Systems, Macmillan Publishibg Company,NJ

M Vidyasagar, Nonlinear Systems Analisis Prentice-Hall,India,1991
Shankar Sastry, Nonlinear System Analysis,Stability and Control, Springer,1999
Ashok D Belegundu,Tirupathi R Chandrupatla, Optimization concepts and Applications in Engineering, Pearson Education,Delhi,2002
John E Gibson, Nonlinear Automatic Control, Mc Graw Hill,NewYork

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project.

TAC 1003 Adaptive Control Systems 3-0-0-3

Different adaptive control strategies - Gain scheduling, MRAS, STR, stochastic adaptive control - Lp spaces - Norms, - stability of Dynamic system. Differential equations, stability definitions - Lyapunov stability Theory - Exponential stability theorems – estimating parameters in dynamic systems with least square methods .

MRAS – adaptation law – adaptation law based on stability criterion – adaptation based on MIT rule – Design of MRAS based on MIT rule – Design of MRAS based on Lyapunov methods – simulation of MRAS systems.

Self Tuning Regulators – Pole placement design – Indirect STR – continuous time STR –Direct STR- simulation of STR systems - stochastic self tuning regulators- linear quadrant STR – adaptive predictive control .

Reference:

Shankar Sastry & Mare Bodson, Adaptive Control, IEEE press

K.J Astrom & B.Wittenmark, Adaptive Control, Pearson Education

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project.

TAC 1004 ADVANCED DIGITAL SYSTEM DESIGN 3-0-0-3

Propagation Delay and Timing Defects in combinational Logic. Hazards – static and dynamic. Essential hazards. Static hazard free and dynamic hazard free combinational logic circuits design. Function hazards.

Synchronous State machine Design and analysis. Design of simple Synchronous State machine Design with edge-triggered flip-flop. Analysis of simple State machine. Detection and elimination of output race glitches. Detection and elimination of static hazards in the output logic. Asynchronous inputs: Rules and caveats. Clock skew. Clock sources and clock signal specifications. Initialization and reset of the FSM: Sanity circuits. Design of complex state machines. Algorithmic state machine charts and state tables. Array algebraic approach to logic design. State minimization. System-level design: controller, data path and functional partition.

Asynchronous state machine design and analysis. Lumped path delay models for asynchronous FSMs. Functional relationships and stability criteria. Excitation table for LPD model. State diagram, K-maps and state table for asynchronous FSMs. Design of the basic cells by using the LPD model. Design of the Rendezvous modules, , RET D flip-flop, RET JK flip-flop. Detection and elimination of timing defects in asynchronous FSMs. Single-transition-time machines and Array algebraic approach. Hazard-free design of fundamental mode FSMs. One-hot design of Asynchronous State Machines. Design and Analysis of fundamental mode FSMs.

Design of state machines using Algorithmic State Machines (ASM) chart as a design tool. Introduction to Field Programmable Gate Arrays (FPGA)- Types, Architecture of Xilinx Vertex II series, Technology mapping, tools for technology mapping. Design examples, FPGA implementation of adders, subtractors, multipliers, Booth I multiplier, carry save SRT – 2 Dividers.

References:

Richard F. Tinder, Engineering Digital Design, Academic Press2001
Jean-Pierre Deschamps, Gery Jean Antoine Bioul, Gustavo D. Sutter Synthesis of Arithmetic Circuits – FPGA, ASIC & Embedded Systems, Wiley – Interscience 2006

Reading

1. William I. Fletcher, An Engineering Approach to Digital Design, PHI, 1996.

N.N. Biswas, Logic Design Theory, PHI, 1993.
James E. Palmer, David E. Perlman, Introduction to Digital Systems, TMH, 1996.

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project.

TAC 1101 INSTRUMENTATION AND CONTROL SYSTEM LAB 0-0-2-1

1. Data Acquisition and control using Lab VIEW.

2. Setting up of PROFIBUS Network.

3. Distributed Control through PROFIBUS.

4. Familiarisation of SCADA and application development using SCADA.

5. Control of Robotic arm.

6. PLC.

7. Cascade control.

8. Feed forward control.

Marks: Continuous Evaluation: 30

End Semester Exam & Viva-voce: 20

TAC 1102 PROJECT PART I - - - 1

Project has 2 parts. The Project shall be hardware / hardware platform based.

The student is expected to select and complete the design of the project work and submit the design phase report and presentation. The design phase report shall be submitted for evaluation. This shall be in soft bonded form. This is the first volume of the Project report. The Second volume is the final project report in the second semester.

Marks: Project Design Report Evaluation : 25

Presentation & Viva-Voce : 25

TAC 1103 SEMINAR 0-0-2-2

The student is expected to present a seminar in one of the current topics in Electronics, Communication, Instrumentation, Computers, Information Technology, Control systems and related areas. The student will under take a detailed study based on current published papers, journals, books on the chosen subject and submit seminar report at the end of the semester.

Marks: Seminar Report Evaluation : 25

Seminar Presentation : 25

TAC 2001 DIGITAL IMAGE PROCESSING 3-0-0-3

Image representation - Gray scale and colour Images, image sampling and quantization.

Two dimensional orthogonal transforms - DFT, FFT, WHT, Haar transform, KLT, DCT.

Image enhancement - filters in spatial and frequency domains, histogram-based processing, homomorphic filtering.

Edge detection - non parametric and model based approaches, LOG filters, localization problem.

Image Restoration - PSF, circulant and block - circulant matrices, deconvolution, restoration using inverse filtering, Wiener filtering and maximum entropy-based methods.

Mathematical morphology - binary morphology, dilation, erosion, opening and closing, duality relations, gray scale morphology, applications such as hit-and-miss transform, thinning and shape decomposition.

Image and Video Compression Standards: Lossy and lossless compression schemes: Transform Based, Sub-band Decomposition, Entropy Encoding, JPEG, JPEG2000, MPEG

Computer tomography - parallel beam projection, Radon transform, and its inverse, Back-projection operator, Fourier-slice theorem, CBP and FBP methods, ART, Fan beam projection.

Image texture analysis - co-occurence matrix, measures of textures, statistical models for textures. Hough Transform, boundary detection, chain coding, segmentation and thresholding methods.

References

1. A. K. Jain, Fundamentals of digital image processing, Prentice Hall of India,

1989.

2. R.M. Haralick, and L.G. Shapiro, Computer and Robot Vision, Vol-1, Addison

Wesley, Reading, MA, 1992.

3. R. Jain, R. Kasturi and B.G. Schunck, Machine Vision, McGraw-Hill International

Edition, 1995.

Reading:

1. W. K. Pratt, Digital image processing, Prentice Hall, 1989.

2. Gonzalez and Woods, Digital image processing , Prentice Hall, 2002..

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project.

TAC 2002 MIXED SIGNAL CIRCUIT DESIGN 3-0-0-3

Standard CMOS device models – BSIM 3, BSIM 4. Differential Amplifiers, Cascode differential amplifier, Wide Swing Differential Amplifier.

Design of CMOS Op Amps, Compensation, Low Noise Op Amps, Low voltage Op Amps.

Design of two stage open loop comparator, High speed comparators.

Switched capacitor circuits – First order switched capacitor circuits, capacitor filters.

PLL, Sense amplifiers, DAC, ADC – High speed ADC, Over sampling ADC.

Reference:

Phillip E. Allen, Douglas R. Holbery, CMOS Analog Circuit Design , Oxford, 2004

Reading:

1. Razavi B., Design of Analog CMOS Integrated Circuits, Mc G Hill, 2001.

2. Baker, Li, Boyce, CMOS: Circuits Design, Layout and Simulation, Prentice Hall India, 2000

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project.

TAC 2101 VLSI AND EMBEDDED SYSTEMS LAB 0-0-2-1

VLSI EXPERIMENNTS USING TANNER TOOLS:

CMOS analog circuits

CMOS digital circuits

CMOS implementation of Neural Networks

Reference voltage sources

Experiments using available kits, packages and tools.

EMBEDDED SYSTEMS EXPERIMENTS

1. Embedded Applications using C Programming and C++ programming

2. Assembler level programming for ARM

3. C programming to illustrate ARM/Thumb Networking

Marks: Continuous Evaluation: 30

End semester Exam and Viva-voce: 20

TMC 2102 PROJECT PART II - - -2

Each student is expected to prepare a report on the project work done by him/her and present a paper highlighting the work done by him/her in a seminar. The student is expected to complete the project work assigned to him/her and submit the project report by the end of semester. This report shall be of a hard bound type and consist of design phase report as volume one and other part as volume two.

Marks: Project Design Report Evaluation : 50

Presentation & Viva-Voce : 50

TCC 2103 SEMINAR 0-0-2-2

Marks: Seminar Report Evaluation : 25

Seminar Presentation : 25

TAE 2001 MICRO ELECTRO MECHANICAL SYSTEMS 3-0-0-3

Historical Background: Silicon Pressure sensors, Micromachining, MicroElectroMechanical Systems.

Microfabrication and Micromachining : Integrated Circuit Processes, Bulk Micromachining : Isotropic Etching and Anisotropic Etching, Wafer Bonding, High Aspect-Ratio Processes (LIGA)

Physical Microsensors : Classification of physical sensors, Integrated, Intelligent, or Smart sensors, Sensor Principles and Examples : Thermal sensors, Electrical Sensors, Mechanical Sensors, Chemical and Biosensors

Microactuators : Electromagnetic and Thermal microactuation, Mechanical design of microactuators, Microactuator examples, microvalves, micropumps, micromotors-Microactuator systems : Success Stories, Ink-Jet printer heads, Micro-mirror TV Projector.

Surface Micromachining: One or two sacrificial layer processes, Surface micromachining requirements, Polysilicon surface micromachining, Other compatible materials, Silicon Dioxide, Silicon Nitride, Piezoelectric materials, Surface Micromachined Systems : Success Stories, Micromotors, Gear trains, Mechanisms

Optical MEMS: Micro opto electro mechanical sensors and systems, fiber optic sensors, Fiber bragg grating, miniature sensors for temperature, pressure, fluid flow applications.

MEMS for automotive, communication and other applications, sensors, small structure.

Introduction to BioMEMS-materiels,sensors,fabrication,application.

References

1. Stephen D. Senturia, "Microsystem Design" by, Kluwer Academic Publishers, 2001.

2. Marc Madou, “Fundamentals of Microfabrication” by, CRC Press, 1997.Gregory

3. Kovacs, “Micromachined Transducers Sourcebook” WCB McGraw-Hill, Boston,

1998.

4. M.-H. Bao, “Micromechanical Transducers: Pressure sensors, accelrometers, and

gyroscopes” by Elsevier, New York, 2000.

5. Gabriel M. Rebeiz, RF MEMS, Theory, Design, and Technology, Wiley Interscience,2003.

Reading:

1. Masood Tabib-Azar, Microactuators, Kluwer, 1998.

2. Ljubisa Ristic, Editor, Sensor Technology and Devices, Artech House, 1994

3. Nadim Maluf, An Introduction to Microelectromechanical Systems Engineering, Artech House, 2000.

TAE 2002                   NANO ELECTRONICS                                              3-0-0-3

An atomistic view of electronic conduction, Schrodinger equation, Self-consistent field -Basis functions, Band structure, Sub-bands - Capacitance, Level broadening Coherent transport - Atom to transistor and

new paradigms in nano electronics - Modeling and Analysis of single electron transistor (SET).

Reversible Computation - Reversible Turing machine- Entropy of Logic gates - Energy and Information Loss - Reversible Logic Gates- requirements - NOT, k-CONT, TOFFOLI gates - Reversible Logic synthesis - Elimination of Garbage - Reversible Lattice structures - Modified Reconstructability Analysis (MRA), Reversible Decision Diagrams, Quantum computation and Quantum Logic gates

Reference

1. S. Data, Quantum Transport: Atom to Transistor, Cambridge University

    Press, 2005

2. David K. Ferry, Shunt Oda, Silicon Nanoelectronics, CRC Press, 2005

3. A N Al-Rabadi,  Reversible Logic synthesis from Fundamental to Quantum

    computing, Springer 2004

Reading

1. CH Bennet, Logical Reversibility of Computation,  IBM Jl. of Res.

    Develp., 17:525-532, 1973

2. CH Bennet, The thermodynamics of computation - a review, Int. J. of

     theoret. Phys., 21(1982) 905-940

3. R Lanunder, Irreversibility and heat generation in the computing

   process, IBM Jl. of Res. Develp., 5:183-191, 1961

4. Vivek V Shende, Aditya K Prasad etc, Synthesis of Reversible Logic

   circuits, IEEE Tran. on Comp. aided Design of Integrated Circuits and

  Systems, Vol 22, No 6, 710-722, June 2003

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project.

TAE 2003 Neuro Fuzzy SystemS 3-0-0-3

Learning processes-Single layer and Multi layer Perceptrons-Principal Component Analysis-Independent Component Analysis-Stochastic Machines.

Introduction to Neurodynamics and Neuroprogramming.

Fuzzy systems-Crisp sets and fuzzy sets – operation on fuzzy sets – fuzzy relations – fuzzy control systems – Case studies. Neural networks and fuzzy systems – Models-Case studies.

Genetic Algorithms and Fuzzy Logic- Basics-Design issues-Convergence rate-Genetic Algorithm methods-Case studies.

References :

1. Simon Haykin, Neural Networks, a comprehensive foundation, 2/e, Pearson Education.

2. Timothy J Ross, Fuzzy logic with Engineering Applications” 2/e, McGraw Hill

3. John Yen, Reza Langari, Fuzzy Logic-Intelligence, Control and Instrumentation, Pearson Education, 2002

Reading

1. Yegna Narayana B, Artificial Neural Networks– PHI

2. Ahamad M.Ibrahim, Introduction to Applied Fuzzy Electronics, PHI

3. S.Rajasekharan,G.A Vijayalakshmi Pai , Neural Networks,Fuzzy Logic and Genetic Algorithams, PHI

4. Martin T.Hagan, Howard B.Demuth, Mark Beale Neural Network Design, Vikas Thomson Learning.

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project.

TAE 2004 COMPUTER VISION 3-0-0-3

Introduction: The Marr paradigm and scene reconstruction, Other paradigms for image analysis.

Image Formation: Image Geometry, Radiometry, Digitization

Binary Image Analysis and Segmentation: Properties, Digital geometry, Segmentation

Image Processing for Feature Detection and Image Synthesis: Edge detection, corner detection, Line and curve detection, SIFT operator, Image-based modeling and rendering, Mosaics, snakes.

Shape from X : Shape from shading, Photometric stereo, Texture, Occluding contour detection.

Motion Analysis: Motion detection and optical flow, Structure from motion

Photogrammetry and Stereo.

Object Recognition: Model-based methods, Appearance-based methods

Invariants.

References:

D. A. Forsyth and J. Ponce, Computer Vision: A Modern Approach , Prentice Hall, 2003.

Reading:

1. B. K. P. Horn Robot Vision, MIT Press, 1986.

2. Linda Shapiro and George Stockman, Computer Vision, Prentice Hall, 2001

3. R. Jain, R. Kasturi and B. Schunk, Machine Vision, McGraw Hill, 1995

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project.

TCC 3101 RESEARCH METHODOLOGY 0-0-0-1

Introduction – Meaning of research – Objectives of research – Motivation in research – Types of research – Research approaches – Significance of research – Research methods vs Methodology – Criteria of good research.

Defining Research Problem – What is a research problem – Selecting the problem – Necessity of defining the problem – Literature review – Importance of literature review in defining a problem – Critical literature review – Identifying gap areas from literature review

Research design – Meaning of research design – Need– Features of good design – Important concepts relating to research design – Different types – Developing a research plan

Method of data collection – Collection of data- observation method – Interview method –Questionnaire method – Processing and analysis of data – Processing options – Types of analysis – Interpretation of results

Report writing – Types of report – Research Report, Research proposal ,Technical paper – Significance – Different steps in the preparation – Layout, structure and Language of typical reports – Simple exercises – Oral presentation – Planning – Preparation – Practice – Making presentation – Answering questions - Use of visual aids – Quality & Proper usage – Importance of effective communication - Illustration

References

1. Coley S M and Scheinberg C A, 1990, "Proposal Writing", Newbury Sage
Publications.

2. Leedy P D, "Practical Research : Planning and Design", 4th Edition, N
W MacMillan Publishing Co.

3. Day R A, "How to Write and Publish a Scientific Paper", Cambridge
University Press, 1989.

TCC 3102 INDUSTRIAL TRAINING 3-0-0-1

There shall be 15 days training in Industrial / Research organization by each student during the Second Semester vacation and present a Seminar and report during the Third Semester. The report shall be approved by the organization / industry where the student have undergone the training.

Marks:

Evaluation of reports : 25

Seminar Presentation : 25

TAE 3001 COMPUTER AIDED DESIGN OF CONTROL SYSTEMS 3-0-0-3

Introduction – The design process – Quantitative behavior and stability theory – Liapunov stability theorems – Root locus analysis – construction – design concepts .

Case study: A light source tracking system, control of a flexible space craft – Root locus design – cascade P plus I compensator – cascade lead compensator – cascade lag lead compensator.

Case study control of a flexible space craft – State space analysis – state space representation – state transformation and diagonalisation – stability – controllability – observability – state space design – State feed back and pole placement – case study: A magnetic levitation system.

Control system design using MATLAB & SIMULINK Part-I. Introduction – the design process – simulating simple systems with SIMULINK – mathematical modes of systems – state variable models – feed back control system characteristics – performance of feedback control systems.

Control system design using MATLAB & SIMULINK Part-II. Stability of linear feedback systems – Root locus method – Design of feedback control systems – Design of state variable feedback systems – Robust control systems.

References :

1. Robert H Bishop, Modern Control Systems Analysis & Design using MATLAB &

SIMULINK, Addison Wesley.

2. Raymond T Stefani etal, Design of feedback control system, 3^rd edn., Saunder’s College Publishing

3. Bernard Friedland, Advanced Control System Design, PHI

Reading:

1. John J D’Azoo, Constantine H Houpis, Linear Control System Analysis & Design, 4^th Edn., Mc. Graw Hill

2. Edward W Kamen, Bonnies S Heek, Fundamentals of Signals and Systems using

MATLAB.

For the End semester exam ( 50 marks), the question paper shall have six questions of 10 marks each covering entire syllabus out of which any five shall be answered. It shall have 75% problems & 25% Theory. For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project.

TAE 3002 PWM schemes for Power Converters 3-0-0-3

Three phase Voltage Source Inverters (VSI) - Fundamental Concepts of PWM schemes, Sine-Triangle PWM, - Space Vector PWM - Comparison of Sine-Triangle PWM and Space Vector PWM - Zero vectors and importance of their placement in PWM -Harmonic Distortion- Harmonic Distortion factors for 3 phase inverters, Harmonic loses in PWM.

Multilevel Inverters- Fundamental Concepts, Modulation schemes- Sine triangle PWM and Space vector PWM 3-level inverters, Extension of the schemes to higher level inverters. Optimum switching in space vector PWM- Over modulation of a Voltage Source Inverter- Space Vector approach to Over modulation - Implementation of PWM controllers- Overview, DSP based implementation.

Current hysterisis control of a Voltage Source Inverter - Introduction to Random PWM strategy .

Reference

1. G.Holmes & T.A. Lipo, Pulse width Modulation for Power Converters, Principle and

practice, IEEE Press, 2003

2. M.P.Kazmierkowski ,Control of Power Converters : Selected Problems, Academic

Press, 2003

3. Current Literature

TAE 3003 RF MEMS Circuit Design 3-0-0-3

Physical and practical aspects of RF circuit design. Impedance mismatch effects in RF MEMS.

RF/Microwave substrate properties. Micro machined- enhanced elements. MEM switches. Resonators. MEMS modeling.

Reconfigurable circuit elements. Resonator MEMS switch Tunable CPW resonator. MEMS microswitch arrays. Reconfigurable antenna.

MEMS phase shifters. Types of phase shifters. Switched delay line phase shifters. Distributed MEMS phase shifters.

RF MEMS filters. Modeling of mechanical filters and resonators. SAW filters. Micromachined filters for millimeter wave applications.

Reference

H.J.D.Santos, RF MEMS Circuit Design for Wireless Communications,

      Artech    House , 2002.
2.   G.M.Rebeiz , RF MEMS Theory , Design and Technology, wiley , 2003.
3.   V.K.Varadan etal, RF MEMS and their Applications, Wiley,2003

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two)

TAE 3004 CURRENT TOPICS IN INSTRUMENTATION 3-0-0-3

The syllabus shall contain current area of research in Instrumentation (45 hrs). The syllabus shall be approved by the Academic committee of the college before the semester starts.

TAC 3101 THESIS – PRELIMINARY 0-0-14-4

This shall comprise of two seminars and submission of an interim thesis report. This report shall be evaluated by the evaluation committee. The fourth semester Thesis-Final shall be an extension of this work in the same area. The first seminar would highlight the topic, objectives, methodology and expected results. The first seminar shall be conducted in the first half of this semester. The second seminar is presentation of the interim thesis report of the work completed and scope of the work which is to be accomplished in the fourth semester.

Weightages for the 4 credits allotted for the Thesis-Preliminary

Evaluation of the Thesis-Preliminary work by the guide - 100 Marks

Evaluation of the Thesis–Preliminary by the Evaluation Committee - 100 Marks

TMC 4101 THESIS – FINAL 0-0-29-12

Towards the end of the semester there shall be a pre submission seminar to assess the quality and quantum of the work by the evaluation committee. This shall consist of a brief presentation of Third semester interim thesis report and the work done during the fourth semester. At least one technical paper is to be prepared for possible publication in journals / conferences. The final evaluation of the thesis shall be an external evaluation. The 12 credits allotted for the Thesis-Final may be proportionally distributed between external and internal evaluation as follows.

Weightages for the 12 credits allotted for the Thesis

Internal Evaluation of the Thesis work by the guide - 200 Marks

Internal Evaluation of the Thesis by the Evaluation Committee - 200 Marks

Final Evaluation of the Thesis work by the Internal and External Examiners:-

(Evaluation of Thesis + Viva Voce) - 100+100Marks

MICROWAVE AND TV ENGINEERING

TMM 1001 MATHEMATICAL METHODS FOR COMMUNICATION 3-0-0-3

Metric Spaces:Definition-Examples-Open and closed sets-continuity-convergence-Cauchy sequence and completeness-contraction mapping Theorem.

Hilbert Spaces; Normed linear spaces-linear operators on normed linear spaces-linear functionals-inner product spaces-Hilbert space-orthogonality-direct sum-projetion theorem-orthonormal sets and sequences-eigen function expansions-separable Hilbert spaces-Riesz representation –Adjoint operator-spectral theory in finite dimensional normed spaces.

Random processes: Sequence of random variables and it’s convergence-Chebychev’s inequality-law of large numbers-Central limit theorem.

Definition and classification of random processes-stationarity(strict sense and wide sense).

Autocorrelation function and its properties.-Ergodicity- ergodic theorems. spectral density function and it’s properties.

Special Random Processes.Poisson process-properties-Markov process- Markov Chains-Transition probability matrix-Chapman-Kolmogorov theorem.-Birth death process-weiner process

Lebesgue measure and integration:.Measure spaces-measurable functions-Lebesgue integration–Fatou’s lemma- Monotone convergence Theorem-Lebesgue convergence Theorem- spaces-Radon Nikodym Theorem(statement only)

References:-

1. Erwin Kreizig, Introduction to Functional analysis with applications, John wiley & sons

2. L.Debnath and P.Mikusinski, Introduction to Hilbert spaces with applications, 3/e,Academic press

3 . T. Veerarajan, Probability, Statistics and Random processes, Tata- McGraw Hill

4. J.Medhi, Stochastic processes, New Age International, India

5. Stark Henry,Probability and random process with application to signal processing,3/e,Pearson Education India.

6. Gray.R.M and Davisson.L.D, An introduction to statistical signal processing, Cambridge university press

7. H.L Royden, Real Analysis, Prentice Hall

8. Gupta, Malik and Mittal, Measure Theory, Kedarnath, India

TMC 1001 ADVANCED DIGITAL SIGNAL PROCESSING 3-0-0-3

Linear Prediction -Forward and Backward Prediction - Levinson-Durbin Algorithm, Schur Algorithm.

Reference

1) P. P. Vaidyanathan, Multirate Systems and Filterbanks, Prentice Hall

2) Wavelet Transforms - Bopadikar and Rao, Pearson Education

3) Insight into wavelets, K. P. Soman, Prentice Hall India

4) Digital signal Processing, By John G. Proakis, Dimitris G. Manolakis

Pearson Education

Reading

1) L. Cohen, Time Frequency Analysis, Prentice Hall.

2) Wavelets and Filterbank, G Strang & T Nguyen , Wellesly-Cambridge

3) Wavelets and subband coding, M Vetterli & J Kovacevic, Prentice Hall

For the internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project.

TMC 1002 Advanced DIGITAL COMMUNICATION 3-0-0-3

Overwiew of Digital Communication.

Digital communication system model. Communication channels characteristics and Models.

Signal space representations. Digitally modulated signals-Representations.

Communication Through Band-Limited Linear Filter Channels.

Optimum receiver for channels with ISI and AWGN.Linear equalization. Decision feedback equalization. Turbo equalization. Self recovering equalization.

Multichannel and Multicarrier Systems.

Spread Spectrum Signals.

Model of Spread spectrum system. Direct sequence spread spectrum signals. Frequency -Hopped spread spectrum signals. Synchronization of spread spectrum signals.

Digital Communications through Fading Multipath Channels.

Characterization and model. Frequency-Non selective, slowly fading channel, Diversity techniques. Digital signaling over a frequency-selective, slowly fading channel. Coded waveforms for fading channels.

Multiuser Communications.

Multiple access techniques. Capacity of multiple access methods. CDMA. Random access methods.

Reference

1. John G.Proakis, Digital Communications, 4/e, McGraw-Hill

Reading

1. Viterbi, A. J., and J. K. Omura. Principles of Digital Communication and Coding. NY: McGraw-Hill, 1979. ISBN: 0070675163.

2. Marvin K Simon, Sami M Hinedi, William C Lindsey - Digital Communication Techniques –Signal Design & Detection, PHI

3. MIT OpenCourseWare, Electrical Engineering and Computer Science,Principles of Digital communication II, Spring 2006

4. Aazhang B. Digital Communication Systems [Connexions Web site]. January 22, 2004. available at: http://cnx.rice.edu/content/col10134/1.3/

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project.

TMC 1003 OPTICAL COMMUNICATION SYSTEMS 3-0-0-3

Lightwave system components-Optical Transmitters and receivers–concepts, components and design. Control of Longitudinal Modes – Design of Optical transmitters.

Receiver Noise and sensitivity. Sensitivity degradation- Receiver Design.

Architecture and Design of Light wave systems- Loss limited and Dispersion limited lightwave systems

Optical amplifiers-Various types-Design of EDFAs- Various Techniques for Dispersive management: WDM systems –Components and performance issues.

Soliton based systems- Impact of amplifier noise-Timing Jitter, Gordon – Hauss Effect, Bit Error Rate Performance.

Coherent light wave systems-Concepts, Modulation Formats and Bit Error Rate Performance.

Reference:

Govind P. Agrawal: Fiber Optic Communication System, John Wiley and Sons, 2003

Reading:

1. W J Diggonet, Rare earth Doped Fiber Lasres and Amplifiers

2. Hasegawa, Solitons in Optical Communications

3. Govind P. Agrawal: Nonlinear Optics, Academic press 2^nd Ed.

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project

TMC 1004 RF CIRCUITS DESIGN 3-0-0-3

Review of transmission lines – Binomial and Chebyshev transformer. Return loss and Insertion loss. Smith Chart - Impedance Matching Using smith Chart. ABCD parameters of simple Two -Port Networks - Impedance Element, T networks , Transmission line section (Analysis - Not required).Scattering Parameters - Chain Scattering Matrix , Signal Flow analysis using S- Parameters.

RF filter design - First order low pass, high pass and band pass filter circuits. Frequency transformation and impedance transformation. Higher order filter design Concepts. Review of BJT and MESFET. V-I characteristics and high frequency equivalent circuit. High Frequency Equivalent circuits of Tunnel diode, Gunn Diode, Varactor diode.PIN diode as an attenuator, Computation of transducer loss.

Design of simple matching and biasing networks .Power Relations for RF transistor and MESFET amplifiers, Stabilisation Methods. Simple BJT and MESFET amplifier design examples.

Microwave oscillators - High frequecy oscillator configuration, Design of MESFET based oscillator. Dielectric resonator Oscillator, gunn Oscillator, YIG Oscillator. Mixers - Design of simple RF mixer circuits based on BJT and MESFET.

Reference

Reinhold Ludwig, Pavel Bretchko, RF Circuit Design-Theory and Application, - Pearson Education.

Reading:

Matthew M. Radmanesh, “Radio Frequency and Microwave electronics”, Pearson Education. Asia 2001
Collins, “Foundation for Microwave Engineering”, 2ndEd. McGraw Hill, Inc.

3. David M.Pozar , “Microwave Engineering” , 2ndEd.Wiley

Equations for K , ∆, Power gain e , radius and centre of gain and noise figure circles, will be provided along with the Question paper for design purpose.

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project

TMC 1005 ANTENNAS AND DESIGN 3-0-0-3

Review of antenna parameters, Reciprocity and reaction Theorems - Analysis of loop antennas - small circular loop of constant current, Circular loop with non-uniform current. Biconical antenna, cylindrical dipole, folded dipole, discone and conical skirt monopole, sleeve dipole. Matching techniques - Sub matching quarter - wavelength transformer, T-match, gamma match, omega match, baluns and transformers.

Antenna arrays – Linear and planar array, array pattern synthesis, Phased arrays. Yagi-Uda arrays – analysis and design, Frequency dependent antennas – Equiangular spiral, Log periodic antennas - design. Analysis of aperture antennas - field equivalence principle, radiation equations, directivity, Rectangular apertures, Circular aperture, horn, dish, Microstrip antennas – characteristics, feeding methods, Rectangular patch, circular patch, Lens antennas, smart antennas.

Reference:

Consrantive A Balanis -Antenna Theory - Analysis and Design – 2/e John Wiley & Sons.
John D. Krans, Ronald J. Marhefka : Antennas for all Applications , 3/e, TMH.
Sopholes J. Orfanidis – Electromagnetic waves and antennas. Available at: www.ece.rutgers.edu/~orfanidi/ewa

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project

TMC 1101 COMMUNICATION SYSTEMS & OPTICS LAB 0-0-2-1

COMMUNICATION EXPERIMENTS:

(1) Simulation Of a RADAR System

(2) Simulation Of Mobile Network using MATLAB

FIBER OPTICS EXPERIMENTS:

(1) Study Of Optical Spectrum Analyser

(2) Design and setting up a WDM system

(3) Measurement Of Fiber Length & Core index measurement using OTDR

(4) Link Analysis Using OTDR

NETWORKING EXPERIMENTS:

Configuring Mail, DNS, HTTP, SAMBA, NFS & YP Servers for Corporate Networks

MICROWAVE EXPERIMENTS:

(1) Calibration & Trouble shooting Of Microwave measurement set up

(2) Crystal Index measurement

(3) Parameter measurements of H –plane , E-plane & Magic T.

(4) Measurement Of Dielectric Constant

Marks: Continuous Evaluation: 30

End semester Exam and Viva-voce: 20

TMC 1102 PROJECT PART I - - -1

Project has 2 parts. The Project shall be hardware / hardware platform based.

Marks: Project Design Report Evaluation : 25

Presentation & Viva-Voce : 25

TMC 1103 SEMINAR 0-0-2-2

Marks: Seminar Report Evaluation : 25

Seminar Presentation : 25

TMC 2001 WIRELESS MICROWAVE COMMUNICATION 3-0-0-3

Line of sight communication, over the horizon systems FM microwave radio stations, Repeaters, microwave antennas .Radio wave propagation, Free space propagation models. Three basic propagation mechanisms. Reflection-ground reflection two ray model. Diffraction-Frensel zone geometry, knife edge diffraction model. Scattering. Long distance path loss model, Log normal shadowing. Determination of percentage of coverage area. Cellular concept ,Interference, Trunking and grade of service, Improving coverage and capacity in cellular systems.

Small scale multipath propagation. Impulse response model of multipath channels. Parameters of Mobile multipath channels Types of small scale fading. Jakes channel model. Digital modulation for mobile radio analysis under fading channels. Diversity techniques, RAKE receiver. Capacity of cellular systems-cellular CDMA, cellular FDMA ,TDMA and SDMA.CDMA Digital cellular standards, Forward CDMA channel, Reverse CDMA channel. Wireless networking – ISDN – evolution, ISDN layers, services, Frame relay, B- ISDN, Asynchronous Transfer Mode (ATM),wireless ATM

Reference

W.Jakes, Microwave Mobile Communication, IEEE Press.

2. Achille Pattavina, Switching Theory: Architectures and performance in Broadband ATM Networks, John Wiley & Sons Ltd., New York.1998

T.S. Rappaport, Wireless Communications: Principles and Practice, Prentice-Hall, 1996
William C Y Lee : Mobile Cellular Telecommunications, 2 edn. Mc. Graw Hill.

Reading :

1. J.G. Proakis, Digital Communications, McGraw Hill, 1995

Wayne Tomasi: Advanced Electronics Communication Systems –PHI, 4^TH Edn. (Chap. 8^th & 9^th ) 5^th Ed, Pearson Education, 2001.
Dr.Kamilo Feher ,Wireless digital communication
Jochen. H. schiller, Mobile communication

For the End semester exam ( 50 marks), the question paper shall have six questions of 10 marks each covering entire syllabus out of which any five shall be answered. It shall have 50% problems &50% Theory.

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project

TMC 2002 MICROWAVE INTEGRATED CIRCUITS 3-0-0-3

Planar Transmission line – methods of analysis. Microstrip line, coupled striplines, microstrip coupled lines, Distributed and lumped elements of integrated circuits – capacitors, inductors, resistors, terminations, attenuators, resonators and discontinuities.

Filters – LPF, BPF, Diode control devices – switches, attenuators, limiters, phase shifters – diode phase shifter, ferrite and differential phase shifters, circulators and isolators.

Microwave integrated subassemblies – L band multifunctional Transmit/Receive module, Electrically tunable L band pre selector balanced amplifier, C band multichannel receiver.

Design and fabrication – RF/Microwave packages, 3 dimensional design, fabrication aspects.

Reference:

Leo Maloratsky: Passive RF and Microwave Integrated Circuits, Elsevier, 2006
Bharathi Bhat and Shiban K. Koul: Stripline-like Transmission Lines for MIC, New Age International (P) Ltd, 1989

Reading:

Yoshihiro Konishi: Microwave Integrated Circuits, CRC Press 1991
Ivan Kneppo: Microwave Integrated Circuits, Springer, 1994

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project

TMC 2101 RF DESIGN AND MEASURMENT LAB 0-0-2-1

1) Study of S parameters of active and passive microwave devices using Network Analyzer.

2) Study of spectrum analyzer.

3) Design and simulation of RF amplifier, Oscillator, attenuators , and Filters using

Microwave Office.

4) Simulation of Antennas using Antenna Design and simulation software.

5) MiniProject: A MiniProject has to be implemented in the field of RF circuit design

Or antennas and a final report should be submitted .

Marks: Continuous Evaluation: 30

End semester Exam and Viva-voce: 20

TMC 2102 PROJECT PART II - - -2

Each student is expected to prepare a report on the project work done by him/her and present a paper highlighting the work done by him/her in a seminar. The student is expected to complete the project work assigned to him/her and submit the project report by the end of semester. This report shall be of a hard bound type and consist of design phase report as volume one and other part as volume two.

Marks: Project work and Report Evaluation :50

Presentation & Viva-Voce : 50

TMC 2103 SEMINAR 0-0-3-2

Marks: Seminar Report Evaluation : 25

Seminar Presentation : 25

TME 2001 COMPUTATIONAL METHODS FOR ELECTROMAGNETICS 3-0-0-3

Introduction to Numerical Methods for solution of partial differential equation, Richardson’s extrapolation formula. Green's Function and it's Numerical Integration and use of Richardson's extrapolation.Finite Difference Method. Solution of one dimensional two dimensional differential equations with simple example. Application to waveguides.

Finite Difference Time Domain (FDTD) method -Yee 's Algorithm - Solution of Maxwell's Equation in 1 ,2 and 3 dimension .Method of Moments - Application of Method of Moments to waveguides and Microstrip transmission lines.

Application of Method of moments for analysis of antenna characteristics - Radiation Pattern , Antenna Impedance, Mutual Coupling and antenna arrays. Spectral Analysis of Microstrip circuits.

Reference

1) Richard C . Booton , Computational Methods for Electro Magnetics and Microwaves. Wiley Series in Microwave and Optical Engineering.

Reading:

1. R.F Harrington, Time Harmonic Electromagnetic Fields, McGraw Hill, Newyork 1961

2. Andrew F. Peterson, Computational Methods for Electromagnetics, IEEE press.

3. Anders Bondeson , Thomas Rylander ,Computational Electromagnetics, Par ngelström Springer 2005, 1/e

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project

TME 2002 SECURE COMMUNICATION 3-0-0-3

Review of Algorithm analysis and Complexity, Number Theory, Review of Algebraic structures, Mathematical Theory of Secrecy Systems, Finite Fields, Polynomial Rings over Finite Fields, Discrete logarithm, Pseudo Random Number Generation and Randomness Tests.

Symmetric Key and Asymmetric Key cryptosystems, cryptographic hash functions, RSA, DSA, Deffiehel man Key Exchange, Digital Signature Schemes, Zero Knowledge Proofs, Elliptic Curve Cryptosystems, DES. AES, Stream and Block Ciphers.

Cryptanalysis methods of stream ciphers, symmetric key systems and asymmetric key systems.

Modeling and Analysis of Cryptographic Protocols. Case studies using AVISPA package.

Reference:

1. N. Koeblitz, A course in Number theory and Cryptography, Springer Verlag

2. Niven, Zuckerman : The theory of Numbers, John Wiley

3. Alfred J. Menezes, Paul C. van Oorschot, Scott A. Vanstone, Handbook of Applied Cryptography, CRC Press

4. Henk CA, An Introduction to Cryptography, Kluwer Academic Pub

5. J A Buchman, Introduction to cryptography, Springer Verlag, 2001

6. JOHN TALBOT, DOMINIC WELSH, Complexity and Cryptography An Introduction, Cambridge University Press, 2006

7. AVISPA package homepage ,http:/ www.avispaproject.org/

Peter Ryan,Steve Schneider,Michael Goldsmith,Gavin Lowe, Bil Roscoe: The Modeling and Analysis of Security Protocols: The CSP Approach, Addison Wesley

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project

TME 2003 DESIGN OF CDMA SYSTEMS 3-0-0-3

Direct Sequence and Frequency Hopped Spread Spectrum, Spreading sequences and their correlation functions, Acquisition and tracking of spread spectrum signals, Error probability of DS-CDMA on AWGN channels, DS-CDMA on frequency selective fading channels,

Performance analysis of cellular DS-CDMA, Capacity Estimation, Power Control, Effect of imperfect power control on DS-CDMA performance, soft handoffs, Spreading/Coding tradeoffs, Multicarrier CDMA. Wideband CDMA.

Multiuser Detection: MF detector, Decorrelating detector, MMSE detector. Successive Interference Canceller, Parallel Interference Canceller, performance analysis of multiuser detectors and interference cancellers.

Reference

1. Kamil Sh. Zigangirov, Theory of Code Division Multiple Access Communication, IEEE Press, 2004

2. Don Torrieri, PRINCIPLES OF SPREAD-SPECTRUM COMMUNICATION SYSTEMS, Springer, 2005

3. Sergio Verdu, Multiuser Detection, Cambridge University Press, 1998

For the Internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project.

TME 2004 CMOS RF CIRCUITS DESIGN 3-0-0-3

System Design Considerations - Basic concepts and system architectures- Noise figure.- Dynamic Range – Sensitivity - CMOS RF Components & Devices - Characteristics of MOSFET at high-frequency.

LNA and Mixers :General considerations for RF CMOS LNA. Input matching- LNA topologies - Power match versus noise match -General considerations for mixers- nonlinear systems as mixers - Configurations and operation of CMOS mixers – multiplier based mixers – subsampling mixers

PLL, Oscillator and synthesizers : Linearised PLL models – phase detectors – sequential phase detectors – loop filters- charge pumps – PLL design examples – frequency synthesis with PLL –prescaling and heterodyne - down conversion techniques

Reference :

Thomas H. Lee - The Design of CMOS Radio-Frequency Integrated Circuits, Cambridge,2004
Razavi B., - RF microelectronics, Prentice Hall
Reinhold Ludwig, Pavel Bretchko, RF Circuit Design, Prentice-Hall, 2000.

For the internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project

TCC 3101 RESEARCH METHODOLOGY 0-0-0-1

Research design – Meaning of research design – Need– Features of good design – Important concepts relating to research design – Different types – Developing a research plan

References

1. Coley S M and Scheinberg C A, 1990, "Proposal Writing", Newbury Sage
Publications.

2. Leedy P D, "Practical Research : Planning and Design", 4th Edition, N
W MacMillan Publishing Co.

3. Day R A, "How to Write and Publish a Scientific Paper", Cambridge
University Press, 1989.

TCC 3102 INDUSTRIAL TRAINING 3-0-0-1

Marks:

Evaluation of reports : 25

Seminar Presentation : 25

TME 3001 ELECTROMAGNETIC INTERFERENCE AND COMPATIBILITY 3-0-0-3

EMI Environment – Sources of EMI, conducted and radiated EMI, Transient EMI, EMI-EMC definitions, units, parameters. EMI coupling principles-Conducted, Radiated and Transient Coupling, Common Impedance Ground Coupling, Radiated Common Mode and Ground Loop Coupling, Radiated Differential Mode Coupling, Near field cable to cable coupling. Power mains and power supply coupling.

EMI specifications, standards, limits - units of specifications, Civilian and Military standards.

EMI measurements – EMI test instruments, systems, EMI test, EMI shielded chamber, Open area test site, TEM cell Antennas, conductors, sensors, injectors, couplers, Military test methods and procedures, calibration procedures.

EMI control techniques – shielding, filtering, grounding, bonding, Transient suppressors, Isolation transformer, Cable routing, signal control, component selection and mounting.

EMC design of PCB – PCB traces cross talk, impedance control, power distribution decoupling, zoning, motherboard designs.

Reference:

Bernhard Keiser, Principles of Electromagnetic Compatibility, Artech house, 3^rd Edn, 1986.
Henry W. Ott, Noise reduction Techniques in Electronics Systems, John Wiley & Sons, 1988.

For the internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two) /Term Project

TME 3002 3-0-0-3

Simulation of Communication Systems and Networks

Simulation and Modeling Methodology, Review of Random Process :Univariate and multivariate models, Transformation of random variables, Bounds and approximation, Random process models - Markov and ARMA Sequences, Sampling rate for simulation.

Random Number Generation, Testing Random Number Generators.

Modeling of Transmitter and Receiver subsystems: Information sources, Radio frequency and optical modulation. Demodulation and detection, Multiplexing.

Communication channels and models: Fading and multipath channels, The Almost Freespace channel, Conducting and Guided wave media, Finite state channel models.

Estimation of parameters in simulation: Quality of an estimator, Estimating the average level of waveform, Estimating the power spectral density of a process.

Estimation of performance measures from simulation : Estimation of SNR, Estimating Performance measures for digital systems :The Monte Carlo Method , Importance sampling method,

Review of Queuing models, Burke's theorem, Queuing Networks, Operational Laws, Mean value analysis , Hierarchical decomposition of Large Queuing networks: Queuing network model with a load dependent server.

Analysis of simulation Results: Model Verification Techniques, Model Validation Techniques, Transient Removal, Terminating Simulations , Stopping Criteria, Variance Reduction

References:

1. M.C.Jeruchim, Philip Balaban and K.Sam Shanmugam, "Simulation of communication systems", Plenum Press, New York,1992

2. Raj Jain, The Art of Computer Systems Performance Analysis, John Wiley and Sons 1991

3. Jerry Banks and John S.Carson, "Discrete-event system Simulation”, Prentice Hall, Inc., New Jersey,1984

4. A.M.Law and W.David Kelton, "Simulation Modeling and analysis", Mc Graw Hill Inc., New York, 1991

For the internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two)

TME 3003 ADVANCED Coding THEORY 3-0-0

Review of modern algebra. Galois fields. Linear block codes; encoding and decoding. Cyclic codes. Non-binary codes.

Convolutional codes. Generator sequences. Structural properties. ML decoding. Viterbi decoding. Sequential decoding. Practical applications of convolutional codes.

Modulation codes. Trellis coded modulation. Lattice type Trellis codes. Geometrically uniform trellis codes. Decoding of modulation codes.

Turbo codes. Turbo decoder. Interleaver. Turbo decoder. MAP and log MAP decoders. Iterative turbo decoding. Optimum decoding of turbo codes.

Space-time codes. MIMO systems. Space-time block codes (STBC) – decoding of STBC.

Reference:

1. S.Lin & D.J.Costello, Error Control Coding (2/e), Pearson, 2005.

2. B.Vucentic & J.Yuan, Turbo codes, Kluwer, 2000

3. C.B.Schlegel & L.C.Perez, Trellis and Turbo Coding Wiley.

Reading

1. Stephen B.Wicker, Error Control System for Digital Communication & Storage, PHI

2. David Joyner (Ed), Coding Theory & Cryptogrphy, Springer

3. Aazhang B. Digital Communication Systems [Connexions Web site]. January 22, 2004. available at: http://cnx.rice.edu/content/col10134/1.3/

For the internal marks of 50, Two test of 20 marks each and 10 marks for assignments (Minimum two)

TME 3004 CURRENT TOPICS IN COMMUNICATION 3-0-0-3

Mathematical Methods for Electronics

Stream Elective II

Non- Dept.(Interdisciplinary) Elective

TAE 3004 Current Topics in Instrumentation

SEMESTER IV

Hrs/week

TMC 1005

Antennas & Design

TME 3002 Simulation of Communication Systems & Networks

TME 3004 Current Topics in Communication

SEMESTER IV

Hrs/week

TSC 1004

*

SEMESTER IV

Hrs/week

TAC 1003 Adaptive Control Systems 3-0-0-3

TAC 1004 ADVANCED DIGITAL SYSTEM DESIGN 3-0-0-3

TAC 1101 INSTRUMENTATION AND CONTROL SYSTEM LAB 0-0-2-1

TAC 1103 SEMINAR 0-0-2-2

Marks: Seminar Report Evaluation : 25

TCC 2103 SEMINAR 0-0-2-2

TAE 2001 MICRO ELECTRO MECHANICAL SYSTEMS 3-0-0-3

TAE 2003 Neuro Fuzzy SystemS 3-0-0-3

TAE 3001 COMPUTER AIDED DESIGN OF CONTROL SYSTEMS 3-0-0-3

TAE 3002 PWM schemes for Power Converters 3-0-0-3

Reference

TAC 3101 THESIS – PRELIMINARY 0-0-14-4

TMC 4101 THESIS – FINAL 0-0-29-12

TMC 1103 SEMINAR 0-0-2-2

TMC 2103 SEMINAR 0-0-3-2

TME 3001 ELECTROMAGNETIC INTERFERENCE AND COMPATIBILITY 3-0-0-3

TME 3003 ADVANCED Coding THEORY 3-0-0